Steps To Troubleshoot Dimly Glowing Fluorescent Light

Use of the compact florescent tubes can easily provide you the following benefits both in short as well as long run. Florescent lamps are very economical in a way that they last for 10 to 20 times more than the incandescent bulbs. Moreover florescent lighting helps slashing down your utility bills as well. As it is known, that incandescent bulbs consume more energy.

The fluorescent lights have done away with the use of outdated electromagnetic ballast and have replaced these with technically advanced electronic ballast. This ballast is placed in a gas file case with an inner coating of phosphor. When the electric current through the ballast flows through the gas, it emits UV rays which in turn ignites phosphor coating and gives us light.

As in the case with any other electrical gadgets, these lights too are not flawless. After some use these lights start giving a dim illumination. We shall now learn to overcome this dimming effect of a CFL.

These lights give optimum light when used in places with temperatures above 50 degree Fahrenheit. At this temperature heat sufficient for full lighting of the lamp is generated.

The solutions here are to use enclosed fixtures that provide insulation from colder air temperatures by trapping a limited amount of air around the lamps.

If the problem is still unsolved, install a new fluorescent light bulb into the light fixture to replace the dim one. Adjust them properly into the prongs at both ends of the fixture.

As known, florescent tubes consist of mercury which is the most toxic chemical when inhaled. Mercury vapors profane the environment when a tube light ruptures. Therefore, one should not simply throw away them rather, use a towel to draw the broken particles of the tube. Also, dispose both the towel and the broken parts of the tube properly.

If even now, the light refuses to light up fully, we may change the ballast. Thus, it is better, replace the light fixture for a new one.

Scott Rodgers is a great expert who has been writing on electrical works for a long time now. His knowledge has given encouragement to a host of workers, ranging from Bellevue Electricians to Phoenix Electricians .

Tags: , , , , , , , , , , , , ,

Comments are closed.